The wide range of hand welded fork terminals by Blue Wave has been setting standards for many years.
Featured here are the most common size / fork variations: - all with wire size and swage depth marking. Fork terminals are amongst the most commonly used wire end fittings, they
are normally attached to pre drilled anchor plates or steel constructions.
Also used in combination with toggles, eyes or U-bolts.
|
|
Art. No. |
Wire
(mm) |
Wire (inch.) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
D (mm) |
D1 (mm) |
A (mm) |
Break load (kg) |
kg/100 |
Pack |
100402 |
2 |
1/16" |
55 |
10 |
32 |
4,0 |
5,5 |
6,5 |
500 |
2,0 |
25 |
|
100502 |
2 |
1/16" |
58 |
12 |
32 |
5,0 |
5,5 |
7,5 |
800 |
2,0 |
25 |
|
100525 |
2,5 |
3/32" |
58 |
12 |
32 |
5,0 |
5,5 |
7,5 |
800 |
2,0 |
25 |
|
100503 |
3 |
1/8" |
67 |
12 |
38 |
5,0 |
6,4 |
7,5 |
800 |
2,3 |
25 |
|
100603 |
3 |
1/8" |
68 |
13 |
38 |
6,0 |
6,4 |
9,5 |
1.300 |
2,8 |
25 |
|
100504 |
4 |
5/32" |
71 |
12 |
45 |
5,0 |
7,5 |
7,5 |
800 |
2,7 |
25 |
|
100604 |
4 |
5/32" |
73 |
13 |
45 |
6,0 |
7,5 |
9,5 |
1.300 |
3,4 |
25 |
|
100804 |
4 |
5/32" |
77 |
15 |
45 |
8,0 |
7,5 |
11,0 |
2.350 |
4,9 |
25 |
100605 |
5 |
3/16" |
83 |
13 |
51 |
6,0 |
9,0 |
9,5 |
1.300 |
4,1 |
25 |
|
100805 |
5 |
3/16" |
87 |
15 |
51 |
8,0 |
9,0 |
11,0 |
2.350 |
5,5 |
10 |
|
109505 |
5 |
3/16" |
91 |
19 |
51 |
9,5 |
9,0 |
12,0 |
3.500 |
7,2 |
10 |
100806 |
6 |
- |
99 |
15 |
64 |
8,0 |
12,6 |
11,0 |
2.350 |
10,0 |
10 |
|
109506 |
6 |
- |
104 |
19 |
64 |
9,5 |
12,6 |
12,0 |
3.500 |
11,3 |
10 |
|
101106 |
6 |
- |
108 |
23 |
64 |
11,0 |
12,6 |
13,0 |
4.700 |
13,9 |
10 |
|
101206 |
6 |
- |
110 |
25 |
64 |
12,0 |
12,6 |
14,0 |
5.400 |
17,6 |
10 |
|
101207 |
7 |
9/32" |
119 |
25 |
70 |
12,0 |
14,2 |
14,0 |
5.400 |
18,1 |
10 |
|
101208 |
8 |
5/16" |
136 |
25 |
83 |
12,0 |
16,0 |
14,0 |
5.400 |
21,6 |
10 |
|
101608 |
8 |
5/16" |
145 |
33 |
83 |
16,0 |
16,0 |
18,0 |
9.600 |
25,5 |
10 |
101410 |
10 |
- |
151 |
33 |
89 |
14,0 |
17,8 |
18,0 |
7.600 |
35,0 |
10 |
101410L |
10 |
- |
149 |
31 |
89 |
14,0 |
17,8 |
22,0 |
7.600 |
36,0 |
10 |
|
101612 |
12 |
- |
174 |
33 |
105 |
16,0 |
20,0 |
18,0 |
10.000 |
60,0 |
5 |
101612L |
12 |
- |
171 |
31 |
105 |
16,0 |
20,0 |
22,0 |
10.000 |
60,0 |
5 |
|
101912 |
12 |
- |
189 |
52 |
105 |
19,0 |
20,0 |
24,0 |
13.000 |
66,0 |
5 |
101912L |
12 |
- |
187 |
48 |
105 |
19,0 |
20,0 |
30,0 |
13.000 |
66,0 |
5 |
|
101912X |
12 |
- |
205 |
52 |
120 |
19,0 |
21,4 |
24,0 |
13.000 |
75,0 |
5 |
|
101914L |
14 |
- |
221 |
48 |
140 |
19,0 |
25,0 |
30,0 |
13.000 |
75,0 |
5 |
102214 |
14 |
- |
232 |
57 |
140 |
22,0 |
25,0 |
30,0 |
17.000 |
112,7 |
5 |
|
102514 |
14 |
- |
235 |
62 |
140 |
25,0 |
25,0 |
30,0 |
24.000 |
125,0 |
5 |
|
102516 |
16 |
- |
264 |
62 |
160 |
25,0 |
28,0 |
30,0 |
24.000 |
140,0 |
5 |
Note: All breakloads are determined by clevis pin
 
|
